Thread breakage detector disk
WARNING :
Turn OFF the paver before starting the work so as to prevent accidents caused by abrupt start of the sewing
machine.
7. Cleaning the filter
1) Adjust so that thread breakage detector disk is
always in contact with thread take-up spring
in the
absence of needle thread. (Slack : approx. 0.5 mm)
2) Whenever the stroke of thread take-up spring
has
been changed, be sure to
thread breakage
detector disc
0.
To make this adjustment, loosen
screw
(Caution)
Adjust so that thread breakage detector disk
does not touch any adjacent metallic parts other
than thread take-up spring
WARNING :
OFF the power before starting the work so as to prevent accidents caused by abrupt
of the
sewing
machine.
Clean the filter
of the control box fan once every week.
8. Draining waste oil
1) Pull the screen kit
0
in the direction of the arrow to
remove it.
2.) Wash the filter
under running water.
3) Reinstall the filter and the screen kit 0.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing
machine.
When polyethylene oiler
0
becomes filled with oil, remove
it and drain the oil.
- 2 1