2 of pattern input
The procedures of the pattern described on the left
(3) Writing into a floppy disk
(Sewing pitch 2.5 mm)
Pattern input
I
) Pressing the [Input selection] key, turn ON the power switch. The
feeding frame comes down and the origin retrieval performance
is
made.
(Note) Keep the [Input selection] key held pressed until the
origin
retrieval performance is made and the display appears.
When
the display appeared, insert a piece of paper or the like on
which the shape of
is drawn by raising /lowering the feeding
frame by means of the feeding frame switch.
2) Press the [Jump] key.
3) Move the feeding frame from 0 to A by the direction key
(Amount of movement is indicated by 0.1 mm unit.]
4) When the [Execution Finish] key is pressed, the feeding frame
will return to the starting point
and the jump feed from 0 to A
will be
5) Press the [Line] key
6) As the pitch is set 2.5 mm, input
by the numeral key, and
press the [Execution Finish] key.
N 000
x = 00300R
Y = 00250
Jump
P = 020 (0.1 mm)
Input P
No 022
N 000
x = OOOOOR
Y = 00000
Sewing
P = 025
29