10. Example 7 of pattern input (Overlapping stitching)
Stitch length 3 mm
After
the circle,
is made. from the end point of the
circle, the stitches are made so as to overlap
and
1) Pressing the [Input selection] key, turn ON the power switch.
The feeding frame comes down, and the origin retrieval is
performed.
(Note) Keep the [Input selection] key held pressed until the
display is shown after the origin retrieval has been
performed.
When the display appeared,
a piece of paper or the like on
which the shape of input is written under the feeding frame by
raising ! lowering the feeding frame by means of the feeding frame
switch.
Press the [Jump] key
3 1 Move the feeding frame from 0 to A by the
Key
4) Press the [Execution/Finish] key.
Origin
X OOOOOA
Y = 00000
Select Function
x + OOOOOR
Y = + 00250
Jump
Press the [Code] key
Select Function
46