– 52 –
It s possble to copy the sewng data of a regstered belt loop pattern number can be coped to an un-
regstered belt loop pattern number. Overwrte copy of the belt loop pattern number s prohbted. If you
want to overwrte a belt loop pattern number, t s necessary to delete the pattern number you do not
need n advance.
→
Refer to
-2-11. How to select a belt loop pattern number", p.50
1
Displaying the data entry screen
Only on the belt loop ndvdual sewng data entry screen (blue)
on whch the pattern button s selected, the belt loop pattern
number can be coped. If the sewng screen (green), s ds-
played, press the set ready key
to dsplay the data entry
screen (blue).
2
Bringing up the pattern copy screen
When you press pattern copy button
A
, the pattern but-
ton copy (selecton of the source pattern to be coped) screen
s dsplayed.
A
3
selecting a copy source pattern number
Select a copy source belt loop pattern number from belt loop
pattern number lst button
B
.
Then, when you press copy destnaton entry button
C
,
the copy destnaton entry screen s dsplayed.
4
Entering a copy destination pattern number
Enter a copy destnaton belt loop pattern number usng nu-
merc keys
D
. It s also possble to search for an unused belt
loop pattern number usng +/- buttons
(
F
,
E
).
5
starting copying
Press enter button
G
to start copy of the belt loop pat-
tern number. The screen wll return to the belt loop pattern No.
copy (copy source selecton) screen wth the coped belt loop
pattern No. beng selected.
* It s also possble to copy the cycle sewng data followng the
smlar procedure.
D
F
E
G
C
B
2-12. How to copy a belt loop pattern number