– 6 –
2-4. Garment body presser/work clamp foot specifications
Garment body presser
1
and
2
for securng the
garment body s provded as standard wth auxl-
ary clamps
3
,
4
,
5
and
6
.
Be aware that the auxlary clamps
3
may be
requred to be removed accordng to the sewng
shape of the belt-loop.
In the case of two knds of sewng shapes; No. 2
and No. 6, auxlary clamp
3
has to be removed.
Loosen two screws
7
and remove the auxlary
clamps
3
from the garment body presser
1
.
(1) Garment body presser
If you have changed the garment body presser,
set the machne settng N802 accordng to the
garment body presser actually beng used.
A
Addtonal clamp s provded
B
Addtonal clamp s not provded
→
Refer to
A
B
1
2
4
7
6
3
5
1. For belt loop shapes nos. 5 and 7, auxiliary clamps
4
and
6
are damaged since they
are rubbed by the fork pin which rolls the belt loop. If the auxiliary clamps are heav-
ily damaged, they can deform or break. It is necessary to periodically change auxiliary
clamps with new ones.
2. Install the auxiliary clamps at right angles to garment body pressers
1
and
2
. Be sure
to check that the auxiliary clamps do not interfere with other parts.
