Judo 8204016, Инструкция по установке и эксплуатации

Страница: 22 / 36

22 JUDO i-soft TGA 4
Operation
ing relay. In addition, an audible warning will
sound.
5.8.1 Enabling the leakage alarm
Press the key 1x and then

2x. The
display shows the following:
Press key <OK> 1x and then key

as often
as necessary, until the display indicates the
following:
Press key <OK> 1x and then key

2x. The
display shows the following:
Press the <OK> key. The display shows the
following:
Press key

or

to change between <on>
and <off>.
The chosen setting is saved by pressing
<OK>.
5.8.2 Sleep mode
Monitoring of the limit values can be tempo-
rarily switched off. This is necessary if large
water volumes are required in an uninter-
rupted period, e.g. garden sprinkling, filling
up of a swimming pool or garden pond.
Press key 1x and then key

1x. The
display shows the following:
Press the <OK> key. The display shows the
following:
After pressing the <OK> key sleep mode
starts. The display shows the following:
alternating with:
The time indication displays the remaining
period in hours.
Pressing the <OK> key will exit the sleep
mode.
Otherwise the leakage alarm will automati-
cally switch back to normal operating mode
after the residual period has elapsed.
Setting the sleep mode time:
The sleep mode time can be set to 1...10
hours in the “Settings / Leak Protection”
menu.
Main menu
• Settings
Setting
• Leakage alarm
Leakage alarm
• on/off
Leakage alarm
off
In sleep mode no monitoring of
water consumption takes place!
Main menu
• Leakage alarm
Leakage alarm
• Sleep mode
Leakage alarm
1...10 hours off
To leave
press <OK>