Judo 8204016, Инструкция по установке и эксплуатации

Страница: 14 / 36

14 JUDO i-soft TGA 4
Operation
5 Operation
5.1 General
Operation start, setting the raw water
hardness, the mixing and the filling with
salt must be performed separately for
each individual softener.
5.2 Control panel
Operation of the water softening system
takes place via the keypad and display (see
fig. 7).
Key functions:
Display background lighting:
– none: normal operation
– alternating light blue/dark blue:
With a water flow
– white: when pressing a key
– yellow: for warning messages
– red: for fault indications
5.3 Menu functions
Pressing the key calls the main menu:
The next or previous sub-menu is displayed
using keys

and

and called using the
OK key.
In the sub-menu individual values are in-
creased or decreased using keys

and

and then accepted using the OK key.
Sub-menus:
Regeneration
– manual regeneration start (see
chapter 5.4.2 “Manually starting regen-
eration of the water softening system”)
Leakage alarm
(Only visible, if the leakage alarm is activat-
ed. For activation, see chapter 5.8.1.)
– Start sleep mode
Fig. 7: Water softening system control panel
Access to the main menu (see
chapter 5.3 “Menu functions”)
- Scroll up in the menu
- Increase value
- Scroll down in the menu
- Reduce value
One menu level back
without saving
Direct access to the information
menu (see section „• Info“
in chapter 5.3)
Two line display
Keypad
Direct access to the settings
of the residual hardness (see
chapter 5.4.3 “Setting the desired
water hardness”)
- Access to the sub-menu
- Accept value and save
and one menu level back
- Acknowledge message
Main menu
• Regeneration