- 49 -
Automatic cruise
During the automatic cruise, it will switch to [AUTO] status, and you can control the
Yaw of UAV (head direction) with remote while you can't control the Throttle or the
directions of UAV with the remote; if you want to control it with remote, you need to
switch UAV to [STAB] or [GPS] mode.
➢
Automatic cruise is a process of implementing planned air route
1) You can arm the UAV by placing UAV on the horizontal ground of safe areas;
2) Click [automatic cruise] and [OK], the ground control station will make sure that UAV
starts to perform automatic cruise after the UAV takes off and reaches the height of 15
meters, and when it implements the automatic cruise, the GUIDED planning interface
will automatically load the flight route (note: if UAV are flying in the sky, UAV will cruise
according to the planned air route of GUIDED point).
3) Click the button of [finish cruise] and UAV will switch to the GPS status;
4) Click the automatic cruise once again to select cruise once again or start to cruise
based on the designated GUIDED point. Select the cruise once again, and UAV will
start to cruise from the first GUIDED point; select "cruise by designated GUIDED point",
UAV will start to cruise following the ascending order of numbers based on the
designated numbers of GUIDED point.
5) During the automatic cruise, you can change the height through the speed on the
instrument board;
