- 12 -
Step 6: when the lithium battery is fully charged, click on "STOP/START 1 or
STOP/START 2" button, and then turn the middle button to "Charge", press the middle
button to enter to the interface and adjust the battery voltage. The voltage of single
battery is about 4.2V, and the total voltage is 25.2V. The battery is disconnected after
being fully charged, and you just need to disconnect the power supply, as shown in
Figure 1.3.2.
（
Figure 1.3.5
）
1.4 .Description and use of the remote control
Serial no.
Name of
switch
Function Description
1
LDrotary switch
to control the tilting of cradle head of high-definition camera
2
3
SB and SA three-gear
switch
Gear
SA
Gear
SB
Operating mode
Gear
1
X, that is,
any stability
Augmentation.
Manual mode is of the highest
priority. In any mode,
if SA switch turns back to the Gear
1,
and the flight mode is manual
stability augmentation.
Gear
3
Gear 1
AUTO GPS
