Contents
1
Operating Elements and Connections
. . 12
2
Safety Notes
. . . . . . . . . . . . . . . . . . . . . . . 13
3
Applications
. . . . . . . . . . . . . . . . . . . . . . . 13
3.1 Conformity and approval . . . . . . . . . . . . . . 13
4
Rack Installation
. . . . . . . . . . . . . . . . . . . . 13
5
Connecting the Receiver
. . . . . . . . . . . . . 14
6
Operation
. . . . . . . . . . . . . . . . . . . . . . . . . 14
6.1 Basic settings . . . . . . . . . . . . . . . . . . . . . . . 14
6.2 Setting the transmission frequency . . . . . . 15
6.2.1 Setting the frequency manually . . . . . . . . 15
6.2.2 Selecting a frequency from a group . . . . 15
6.2.3 Scan function . . . . . . . . . . . . . . . . . . . . . 15
6.2.4 Storing preferred frequencies
in your own frequency groups . . . . . . . . . 16
6.2.5 REMOTSET
®
function
Setting the transmitter to the same
frequency . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3 Adjusting the output level . . . . . . . . . . . . . . 18
6.4 Interference suppression . . . . . . . . . . . . . . 18
6.5 Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7
Specifications
. . . . . . . . . . . . . . . . . . . . . . 19
Transmission frequencies . . . . . . . . . . . . . . 36
All operating elements and connections de
-
scribed can be found on the fold-out page 3.
1 Operating Elements
and Connections
1
Receiving antennas
2
Button REMOSET to set the transmitter to
the transmission frequency of the receiver
chap ter 6.2.5
3
LED RF (
r
adio
f
requency) for the power of the
radio signal received
4
LED AF (
a
udio
f
requency) for the volume of the
audio signal received
5
Display, the section on the left indicates:
which of the two antennas (1) receives the
more powerful radio signal (A or B); if there
is no reception from a transmitter, x will
appear
if the key lock has been activated
the audio output level adjusted
[Mute, -31 … -1, Max.]
ID
the identification number adjusted for the
REMOSET function (0 … 255)
the battery status in the transmitter; if there
is no reception from a transmitter or if the
transmitter is muted, the message MUTE
will appear instead of the battery symbol
The section on the right indicates:
the name of the unit, any name may be selected
(10 characters)
G = the group number (1 …12, U1 … U6)
CH = the channel number (1 … 60)
MHz = the receiving frequency
(624.000 … 694.000 MHz)
6
Button SETUP to call up the setup menu shown
in fig. 1 (keep the button pressed for 2 seconds
until the menu appears on the display) and to
save the setting (press the button briefly)
7
Control knob PUSH / CONTROL
If the menu has been called up:
–
turn the knob to select a menu item or to
change a setting.
–
press the knob to call up a menu item.
8
Button EXIT to exit the menu or a submenu
12
ENGLISH
