Step 9
Remove the nut and then the
clamping plate.
Step 10
Flip over the scooter in order to
unscrew the brake cable.
Step 11
With pliers, unscrew the left
nut then take out the brake
cable.
Step 12
Flip the back part of the scoo-
ter over.
Step 13
Remove the drive belt from the
receiving pulley.
Step 14
With Allen key, unscrew the left
screw from the motor.
Step 15
Retrieve the screw and the
sleeve and then remove the
drive belt from the motor’s
pulley.
Step 16
Take out the back wheel and
the receiving pulley.
Step 17
Completely remove the drive
belt.
Step 18
Replace it with a new belt.
Step 19
Replace the new belt around
the metallic crankcase.
Step 20
Put it around the motor’s
pulley.
Step 21
Then put it around the recei-
ving pulley.
Step 22
Verify that the notches are
properly placed into the ones
of the receiving pulley.
Step 23
Replace all the elements
previously taken out from steps
15 to 2.
Drive Belt changed !