JRI SPY RF AlarM, Руководство пользователя

Страница: 7 / 8

©JRI 7
a) Setting up
The Spy RF AlarM as a default settings:
When an alarm goes on, the buzzer, the led turn on. The relay contact turn on during 4’ and turn off automatically 4’ later 5
time by default before sopping definitively.
These activation / relaese delay are programable
From
Device management page (in Sirius), select the Spy RF AlarM (90 AX XX XX) and then click on More details
button
1 = Number of open/close contact cycle before relay stop
Acknoledge the alarm in Sirius to initialize it again
2 = contact duration for each state(in second)
3 = activation led and buzzer coefficient.
(Take care changing this setting modifies the duration of
battery life)
It is recommanded to program a planned task ”reading Spy RF Alarm configuration” to check if it is already
operational. If the device do not answer to the Sirius request, Sirius will send a technical alarm.
b) Sending remote alarm
To remote alarms through the Spy RF AlarM, open Configuration window and click on Remote alarms
.
1
2
3
Time period in which the remote alarm is activated. Each square
equals to 30 minutes. The selection or deselection of a period is
done by a click / slide.
!