JRI SPY RF AlarM, Руководство пользователя

Страница: 4 / 8

©JRI 4
BIP
Stop is temporary (4 min) only for the relay. The alarm will go on
again until it will be acknowledged by Sirius.
The relay will stop after a number of cycle (see p 4). The led and
buzzer will always advertise. The relay functioning will be
initialized after a Sirius acknowledgement.
III.
PRESENTATION
Functioning
Stop alarm
In alarm
=>
IV.
INSTALLATION
a) Installation recommendations

Place the devices at ~2m high and around 30 to 40cm from the ceiling to avoid obstacles and moving persons.

If possible, place the Spy RF in central position regarding the Spy RF recorders.

Try to place them preferably at sight of each other.

On the wall, it is preferable to them aside by using the special bracket (ref 08512) of the catalog.

Place the antenna above the top the monitored unit (fridge, incubator, oven, cold rooms…),.

Never place the Spy RF horizontally.

If some difficulties persist, it is possible to use Spy Rf RelaY (repeaters) or to connect another Spy RF ModeM to
the Ethernet network (LAN).
b) Installation of wall-mounting bracket
c) Activation
BIP
By default, the alarm is alternatively on and off 4’only for
the relay.