©JRI
3
I.
INTRODUCTION
Congratulations, you own a SPY RF Alarm ! This device allows to locally advertise with a remote alarm system in case of
need or order.
a)
Equipment
1 Spy RF Alarm
1 wall-mounting bracket
1 adhesive plaster
1 protection connector
1 user manual
b)
Symbols
II.
INSTALLATION RECOMMENDATIONS
The Spy RF Alarm is an alarm device able to communicate wirelessly with the operating software SIRIUS.
The wireless communication is based on radio frequency. As we are daily in contact with it (radio, TV…) it is easy to think
that it always works. This is true if basic rules on the positioning of recorders are respected because wireless
communication is subject to perturbations.
a.
Perturbations sources
Presence of obstacles in the way of the waves between the Spy RF ModeM and the Spy Rf (wall, ceiling, person,
furniture…) or close to the antenna.
Obstacles thickness in the way of the waves. The absorption is more important in diagonal as perpendicularly
Waves cannot pass through full metallic walls. On the other hand, a perforated wall allows the waves passing with
attenuation
RECYCLING : do not throw in a rubbish dump or in a domestic waste container. Comply with the regulation to throw away the
device.
POWER SUPPLY : this device is powered by a continuous current delivered by a main power supply adaptor (230VAC). Comply to
the security and utilization regulations of electric power. Use an electric installation complying with these regulations
CE MARKING :this equipment is certified to comply with the European regulation for the electric security, inflammability, disturbing
radiation emission and immunity to surrounding electric disturbances.
FCC ID:W45 03330
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
In accordance with FCC requirements, changes or modifications not expressly approved by JRI could void the user's authority to
operate this product.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense
Содержание SPY RF AlarM
Страница 1: ...USER MANUAL Spy RF Alarm 06255D ...
