JRI SPY RF AlarM, Руководство пользователя

Страница: 5 / 8

©JRI 5
1
2 3
2
To start the SPY RF, press between 3 and 10” on the button:
- the 2 LEDs are on and flash at the same time
- The green led blinks evry seconds
To stop the Spy RF, press on between 3 to 10’’ on the button
- the 2 leds are on and and flash one after the other.
Stop is possible only if there is no alarm, otherwise acknowledge it before with Sirius.
V.
BATTERY CHANGE
VI.
RESET
If the device does not work anymore (cannot turn it on…), use the Reset function in the same way as the battery change.
VII.
CHARACTERISTICS
Duration alarm on Suitable
Duration alarm off Suitable
Operating range -10°C +70°C
Storage range -40 + 85°C
Radio range (in free field) 1km
Radio band 868MHz or 902MHz
Power supply 9 VDC – 300 mA*
battery life 200 alarms or 2years
Dimensions 123x69x30mm
Protection degree
IP34
EN 12 830 compliance Yes : this device must be regularly checked according to
EN 13 486 (1 time per year recommended)
CE ERM compliance EN 301 489 / EN 61000 / EN 61010 EN 55022 / EN 300 220
FCC compliance FCC part 15
* Supplied for the european market
KEEP THE BATERY FAR FROM THE FIRE ; DO NOT TRY TO RELOAD OR TO SHORT CIRCUIT IT. USE ONLY BATTERIES
SUPPLIED BY JRI (REF 06569)
!
a
a) Unplug the battery connector .
b) Short circuit the 2 pins with a screwdriver
c) Connect the new battery
d) Change the seal
e) Close the battery cover
Never unscrew.
This will cancel
the warranty
1
3
Open the
battery cover
b
AlarM
AlarM
>3’’ / <10’’