JRC JMA-5104 Скачать руководство пользователя страница 207

Страница: 207 / 242

180

9.8.18 Setting information in a WAAS receiver

Set initial values in WAAS receiver (WAAS receiver of JRC). A WAAS receiver demonstrates

high precision position fixing from GPS by receiving, from satellites also, the same information as

that received from the DGPS beacon station.

1. Setting a WAAS mode [MENU]

This function sends, to a DGPS receiver, the setting information as to whether differential

information of a WAAS receiver is obtained from a beacon or a satellite.

Use the following procedure to set information as to whether differential informat

Use the following procedure to set information as to whether differential information is

ion is

received from a beacon or a satellite.

(a) Display the INSTALLATION menu by pressing the

[MENU]

key in long mode, select

GPS , WAAS SETTING , MODE and press

[JOG DIAL]

[ACQ/ENT]

(b) When the following menu is displayed, select BEACON , WAAS , or AUTO by

turning

[JOG DIAL]

and end the operation by pressing

[JOG DIAL]

[ACQ/ENT]

MODE

AUTO

BEACON

WAAS

NO USE

AUTO

TX COMMAND

WAAS SETTING

2. Setting a position fixing satellite [MENU]

This function sends, to a WAAS receiver, the setting information as to whether a WAAS

satellite is used as a position fixing satellite. The function also sets information as to whether

a WAAS satellite is used as a satellite for position fixing.

Use the following procedure to set information as to whether differential information is

recei

received from a beacon or a satellite.

ved from a beacon or a satellite.

(a) Display the INSTALLATION menu by pressing the

[MENU]

key in long mode, select

GPS , WAAS SETTING , RANGING and press

[JOG DIAL]

[ACQ/ENT]

(b) When the following menu is displayed, select OFF (not used) or ON (used) by

turning

[JOG DIAL]

and end the operation by pressing

[JOG DIAL]

[ACQ/ENT]

MODE

AUTO

RANGING

OFF

NO USE

AUTO

TX COMMAND

WAAS SETTING

3. Setting information whether a prohibited satellite can be used [MENU]

This function sends, to a WAAS receiver, the setting information as to whether a prohibited

WAAS satellite is used.

Use the following procedure to set information as to whether a prohibited WAAS satellite is

used.

Содержание JMA-5104



















































































































































































































































Результаты поиска

Содержание JMA-5104

Отзывы:

JRC JMA-5104, Инструкция по эксплуатации, Страница: 207 / 242

Результаты поиска

Содержание JMA-5104

Отзывы: