JRC JHS-800S Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 156

JRC JHS-800S Скачать руководство пользователя страница 97

Operation

4-45

4.6.2 Playback of received voice

When the squelch is open, incoming audio is automatically recorded (up to 480 seconds), and can
be replayed to confirm audio communications. Recorded audio is divided into multiple tracks
depending on the time for the squelch open/close, and stored until power off. If the total recorded
time of all tracks reaches 480 seconds, the oldest recorded track is overwritten.

(1) Replay and stop operations

■

Procedure

■

1

11

.

..

In the main menu, touch the [VOICE FUNC] →
[PLAY-BACK] buttons.

➢

If existing any recorded tracks, replays the latest track

immediately.

➢

The example at right shows the following.

-

Replaying track number:

1

-

Total track numbers:

12

-

Counter value (elapsed time): 2 seconds

-

Recorded time of the track: 36 seconds

2

22

.

..

After finishing the playback of a track, the next track is
displayed and the playback mode stops.

(2) Fast forward and rewind operations

During playback, the fast forward or rewind is available by the following procedure.

■

Procedure

■

1

11

.

..

Touch

or

during playback.

➢

Touching

fast forwards and increases the counter value.

➢

Touching

rewinds and decreases the counter value.

2

22

.

..

Touching

starts playback from the time on the

counter.

Operating procedure

Shows the previous track.

Shows the next track.

Plays the track that is shown.

Pauses the track that is being played.

Shows the operation buttons (SAVE, ERASE).

Rewinds the track that is being played.

Fast forwards the track that is being played.

«
...
95
96
97
98
99
...
»

Содержание JHS-800S





























































































































































Отзывы:

Нет отзывов