JRC JHS-800S Скачать руководство пользователя страница 90

Страница: 90 / 156

Operation

4-38

Receiving distress alerts

When a distress alert is received from another ship, displays the event immediately with the
specific two-tone alarm sound.

WARNING

If a distress alert is received, make sure to inform the ship's captain or officer
in charge. Doing so may save the lives of the crews and passengers on the
ship in distress.

■

Procedure

■

When a distress alert is received, the distress
message is displayed.

➢

The receiving mark blinks and the alarm gradually grows

louder. Also, the message for this example is shown

below.

➢

If no procedure exists, starts operating the received

message automatically.

Touch the [STOP] button to stop the alarm and display
the screen at right.

➢

The screen at right is displayed. Keep watch for at

least 5 minutes, and then notify the coast station as
appropriate.

➢

Select a process with the buttons.

[ ACK ]:

Sends the acknowledgement to the distress
alert.

[ RLY ]:

Sends the distress relay.

[ INF ]:

Indicates the received distress message.

[ACT/HOLD]: Holds or releases hold on the transmission that is in progress.
[ END ]:

Terminates the procedure.

The distress acknowledgement is normally sent from a coast station. However

after consulting with the RCC or a coast station and being directed, it is possible

to acknowledge the ship in distress from your own ship.

After sending the acknowledgement, start communicating with the ship in

distress according to the following procedure.



Say "MAYDAY".



Repeat the identity (MMSI) of the ship in distress 3 times



Say "This is..."



Repeat the identity (MMSI) of your ship 3 times



Say "RECEIVED MAYDAY".

The distress relay calls may be received without receiving the distress alert. In

this case, keep watch the CH16 and handle the message using the displayed

options as appropriate.

Note

Содержание JHS-800S





























































































































































Результаты поиска

Содержание JHS-800S

Отзывы:

JRC JHS-800S, Инструкция по эксплуатации, Страница: 90 / 156

Результаты поиска

Содержание JHS-800S

Отзывы: