JRC JHS-800S, Инструкция по эксплуатации, Страница: 70 / 156

Operation
4-18
3
33
.
..
The operating display is appeared and initiates the
DSC call
After checking the channel free condition, sends the
message and waits for the acknowledgement.
The following operations are possible while you
wait for acknowledgement.
- RTRY: Resends the message.
- INF: Indicates the message contents.
- HLD: Makes the event on hold.
- END: Terminates the event.
4
44
.
..
When acknowledgement is received, the received
mark flashes and the alarm sounds.
➢
Touch the [STOP] button to stop the alarm.
➢
The working channel is set automatically.
5
55
.
..
After setting the working channel, start
communications using the handset.
➢
The screen as shown at right is displayed.
➢
When completed the communications, return the
handset to the cradle.
If the station is unable to comply with the call, own station (caller) may receive one
of the following responses may be received. In these cases, if possible according
to the message, wait and retry the calling again later. (* is for the coast station
only.)
Message Content
NO REASON No reason.
CONGESTION* The marine exchange center is congested.
BUSY Busy.
QUEUE The call has been queued.
BARRED The station is closed.
NO OPER Existing no operator.
TEMP NO OPER The operator is temporarily away.
EQP DISABLED The equipment has been disabled.
UNABLE CH The proposed channel cannot be used.
UNABLE MODE The proposed mode cannot be used.
Note
Note