JRC JHS-800S, Инструкция по эксплуатации, Страница: 119 / 156

Settings & Registrations
5-16
5.6 Other settings
The following describes the procedure to set the conditions regarding the AIS information import,
the printer property, and preset squelch with respect to each channel.
5.6.1 Enabling the AIS function
When connecting the AIS to use the information for such as a DSC call, set the import condition to
ON as follows.
■
Procedure
■
1
11
.
..
In the main menu, touch the [SETUP] → [AIS FUNC]
buttons.
The factory setting is default “ON”.
2
22
.
..
Turn the setting to ON using the [+]/[-] buttons.
3
33
.
..
Finally, touch the [
✓
] button to register.
5.6.2 Setting printer properties
When connecting the printers, configure the conditions, as follows.
■
Procedure
■
1
11
.
..
In the main menu, touch the [SETUP] → [PRN PROP]
buttons.
➢
The setting items are as follows.
STATE: Set the print function to ON or OFF.
(Setting range: ON, OFF)
IP ADDRESS: Set the printer's IP address.
(Setting range: 000.000.000.000 to
255.255.255.255)
PORT: Set the printer's port.
(Setting range: 00000 to 65535)
DATA OUT: Set the printing method for DSC messages.
(Setting range: AUTO, MANUAL)
DIRECTION: Set the direction to print text.
(Setting range:
INVERT
,
UPRIGHT
)
2
22
.
..
Display the items to change with the [↑]/[↓] buttons, and then make changes using
either the [+]/[-] buttons or the [Edit] button.
3
33
.
..
Finally, touch the [ ✓ ] button to register.
Note