JRC JHS-800S Скачать руководство пользователя страница 81

Страница: 81 / 156

Operation

4-29

4.4.2 Receiving safety or urgency individual calls

When receiving an individual DSC call from a coast or ship station, according to the message,
perform the following procedures as appropriate.

■

Procedure

■

The receiving screen at right is displayed, and the
receiving mark flashes and the alarm grows louder
gradually.

➢

If no procedure exists, starts operating the received

message as the active procedure automatically.

➢

In the case of an urgency call, the alarm is stopped by

pressing the [STOP] button.

➢

After that, similar as the routine individual calls

mentioned above except to use CH16 basically.

Receiving special safety individual calls

(test calls and position request calls)

(1) Receiving safety test calls

■

Procedure

■

The receiving screen at right is displayed, and the
receiving mark flashes and the alarm grows louder
gradually.

➢

If there was no immediate previous transmission, and

TEST in the AUTO ACK menu (MENU>SETUP>DSP

OPE) is ON, then automatic acknowledgement is done.

➢

To do a manual acknowledgement, stop the alarm with

the [STOP] button, and then touch the [ACK] button.

(2) Receiving safety position request calls

■

Procedure

■

The receiving screen at right is displayed, and the
receiving mark flashes and the alarm grows louder
gradually.

➢

If there was no immediate previous transmission, and

POSITION RQ in the AUTO ACK menu

(MENU>SETUP>DSP OPE) is ON, then automatic

acknowledgement is done.

➢

To do a manual acknowledgement, stop the alarm with

the [STOP] button, and then touch the [ACK] button.

➢

To transmit a non-acknowledgement, touch the [NACK]

button.

Содержание JHS-800S





























































































































































Результаты поиска

Содержание JHS-800S

Отзывы:

JRC JHS-800S, Инструкция по эксплуатации, Страница: 81 / 156

Результаты поиска

Содержание JHS-800S

Отзывы: