JRC Handy Search NJJ-95B, Инструкция по эксплуатации

Страница: 66 / 105

3.6 External Output Methods
This unit is equipped with functions for printing the screen to a special printer (option) and a function
for saving scan test data to a compact flash memory card.
The following explains how to use the functions:
3.6.1 Printer Output
(1) Setting of an output destination
Press the 4
SET
key on the scan test screen, and set "Printer (I)" for "External output" on the
parameter setting screen.
(2) Installation of the printer
Set up the printer so that the IrDA optical receiver faces the IrDA optical receiver on the front of
this unit at a distance of between 50 and 500 mm.
Note that if there is an obstacle between the radar and printer or the printer is not
installed at an angle of
±
15 degrees, the printer is unable to operate.
(3) Printing
Pressing the 13
OUTPUT
key enables printing to the printer.
Data in the range from 0 m (0 s) up to the currently displayed screen contents will be printed.
During output to the printer, "Date, Data No." as well as the message "Under printing" will be
displayed on the LCD screen.
Notes
● Use the designated (recommended) printer.
‑ 54 ‑