JRC AlphaWind AlphaLine MFL Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 64

JRC AlphaWind AlphaLine MFL Скачать руководство пользователя страница 23

23 | Operation

2 Operation

2.1 Power

The unit must be connected to the power at all times.

•

Use the power button in the front panel of the instrument to switch the power ON and OFF.

Note In the OFF position, the power button is still dimly lit for easy identification in the dark. This only applies
when the instrument is connected to the power supply.

Note In a blackout situation, the instrument will always return to the last power state. This means that if the
instrument was switched ON before a blackout, it will be ON after a blackout. The same applies to the OFF
status. When the instrument is switched ON, the power button is lit in accordance with the DIM setting of the
LCD backlight, so the power buttons dims together with the LCD panel.

2.2 Main Screen

When the AlphaLine Instrument is switched ON, it will boot into the AlphaLine Instrument application. The application will
show the instrument specific data applicable to the particular instrument.

During the initialization time, while the instrument is starting up, the screen displays Figure 16: Splash Screen (example)
on page 23 . Depending on the display, the lower half of the screen shows the size of the instrument.

Figure 16: Splash Screen (example)

After the initialization time has been completed, the main screen appears. The main screen displays four standard
buttons. See Figure 17: Main Screen AlphaWind Fore on page 24 and Table 10: Main Screen Buttons on page 24.

«
...
21
22
23
24
25
...
»

Содержание AlphaWind AlphaLine MFL

































































Отзывы:

Нет отзывов