JRC AlphaWind AlphaLine MFL Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 64

JRC AlphaWind AlphaLine MFL Скачать руководство пользователя страница 22

22 | Installation Instructions

Software Application Name

Commercial Name Instrument

Wind_8,4_LS_SEA

Wind_AFT_8,4_LS_SEA

AlphaWind

Table 9: MFL Software Applications

1.2.2 Software Updates

Alphatron Marine is constantly improving and updating its products by developing new functionalities and improving
usability and performance.

Visit our support website www.jrc.am/support for the newest manuals and to check that your product is still running the
latest software. Due to the nature of our products and solutions, software and relevant instructions will be available to
authorized distributors and dealers only.

Software update files and procedures are made available by Alphatron and can be acquired from the Alphatron Service
Desk at www.jrc.am/support.

Note DO NOT shut down the device during an update procedure, because this can cause irreversible damage
to the files on the internal storage device.

1.2.3 Watchdog Protection

AlphaLine display unit is guarded by a watchdog application. When the software freezes for an unknown reason,
then after a pre-programmed period, the display unit will restart itself and ensures that the display unit is functional
continuously.

Watchdog application is fed by a task with the lowest priority in a multitask environment. See Figure 15: Watchdog
Application on page 22. If one task freezes, the scheduler performs a context switch to other tasks with the same or
higher priority. This way, the task with a lowest level will not be scheduled and the watchdog will not be fed. And finally,
the watchdog will reset the processor.

Figure 15: Watchdog Application

«
...
20
21
22
23
24
...
»

Содержание AlphaWind AlphaLine MFL

































































Отзывы:

Нет отзывов