16 | Installation Instructions
1.1.4.1.1 Adjusting Potentiometers
Adjusting the Potentiometers
The potentiometers are aligned in the factory. The middle position of the potentiometers corresponds with the mark on
top of the axle and the red dot on top of the Rudder Feedback Unit MD. When further adjustment is to be made, this has
to be done in the equipment connected to the Rudder Feedback Unit MD.
1.1.4.2 Opening Rudder Feedback Unit HD
The Rudder Feedback Unit HD needs to be opened to connect the wires.
1. Remove the 10 screws of the front hatch, see Figure 12: Rudder Feedback Unit HD Ten Front Hatch Screws on page
16.
INFO:
Figure 12: Rudder Feedback Unit HD Ten Front Hatch Screws
2. Remove the front hatch of the Rudder Feedback Unit HD.
The Rudder Feedback Unit HD is now open for connection of the wires according to Figure 20: Connection Diagram
Rudder Feedback Unit HD on page 29.