JRC ALPHAMIDICOURSE Mk2, Инструкция по установке и эксплуатации, Страница: 50 / 99

50 | Operation
2.3.7 Error
The AlphaMidiCourse Mk2 will continually check for faults while the system is running. If an error occurs, an alarm code
will be displayed, a led indication will be flashing and an audible alarm will be activated.
For the alarm code indication, refer to chapter 2.9
Alarm.
When there are no alarms, the display indication is as shown below:
When an alarm is activated the display indication is as shown below.
Alarms are displayed in the data indicator in the activated order from the left as shown below.
See below example: Presently alarms with code 3 (W), A (W), c (W) and P (C) were activated in order.
Note In above example the WARING alarm indication code and led will (blinking) until pressing ACK/ENT
button, refer to paragraph 2.9.3. Alert Priority.
When more than 4 alarms are active, this will be indicated with a dot behind the last number as shown below.
Further alarm codes may then be displayed by pressing the ▲.
See below example: When alarms code 3, A, c, P and L were activated.