JRC ALPHAMIDICOURSE Mk2, Инструкция по установке и эксплуатации

Страница: 43 / 99

43 | Operation
2 Operation
In this chapter, procedure of operation, starting and stopping of this system are explained. Before operation, confirm that
each unit of the master compass and the control unit are properly installed.
• WARNING
• Matters requiring attention in starting up and operations during progress are described in chapter Operations
and are punctuated with a CAUTION or a WARNING, which must be strictly observed.
• Attentively read the Operator Manual of the automatic steering system carefully preparing for occurrence of
trouble or alarm in this system. The emergency steering method should be well understood to easily respond
to failures, or alarms.
For the automatic steering system, carefully read the related Operator Manual in separate volume supplied by the
manufacturer and perform appropriate preparation and handling before its operations.
2.1 Operating panel
The operating panel is located in the Control Unit, see figure below.
Figure 18: Control Unit
No
. Name
1 Operating panel
2 Power switch
3 Serial plate