JRC ALPHAMIDICOURSE Mk2, Инструкция по установке и эксплуатации, Страница: 44 / 99

44 | Operation
2.2 Explanation of the Operating Panel
Figure: Operating Panel
POWER switch Power switch / Power indicator
1. Open cover
2. Press to start/stop system
3. Close cover after start-up, so as not to inadvertently push the button.
DISP switch Select the displayed item and the displayed data.
1. Press to display data in order.
2. Press DISP and ACK/ENT simultaneously to display data in reverse order.
3. Refer Data and Mode Display for displayed text.
SET switch Change data and change the input system.
• Change data: Gyro Compass True Heading / Ship Speed / Latitude / Rate of Turn.
• Change input system: ¹
Ship Speed (MANUAL, GPS, LOG and LOG (serial signal))
Latitude (GYRO and GPS).
ACK/ENT switch Determines the changed data and the changed input system.
Press to stop alarm buzzer when an alarm has been activated.
▲▼
switches Change data and change the input system.
Normally these are used to adjust illumination of the indicator.
1. Press
▲
for brighter.
2. Press
▲
for darker.
3. Press simultaneously for lamp test.
4. Data Display, the Mode Display and all lamps light up and it buzzes during the lamp test.