3.
Insert the SIM Card
You can now insert your SIM card into the GPS unit. It is inserted as per the diagram below (with
the chip facing up). Use the supplied plastic tool which can be found next to the GPS Tracker in
the package you received to push the SIM in place until it snaps in place.
4.
Turn the GPS unit On
After inserting the SIM Card you can use the small switch to the left of the SIM Card slot to
power the unit on so it automatically comes on when 12 volts are connected. This saves you
having to go back into the waterproof cover.
Using the supplied tool slide the switch to the RIGHT.
5.
Connect the GPS to a 12 volt source using the wiring diagrams provided.
6.
You should see the lights come on. Wait approximately 2 minutes for the GPS unit to get a GPS
and mobile signal connection (refer to Light Descriptions table to see status).
