9
XP70 Instruction Manual
In helicopter mode the XP70 offers three ()
programmable mixes that allow stick or switch inputs to
control the output of two or more servos. This function
allows mixing any one channel to any other channel or the
ability to mix a channel to itself. The mix can remain ON
at all times, or be switched OFF in flight using a number
of different switches. (Refer to chart at right.) Mix values
are adjustable from 0 to 1%. Each channel is identified
by a four character name (i.e., Aileron - AILE, Elevator
- ELEV, etc.). The channel appearing first is the master
channel. The second channel is the slave channel. For
example, AILE - ELEV would indicate aileron to elevator
mixing. Each time the aileron stick is moved, the elevator
will deflect, and the elevator will automatically move in
the direction and to the position based on the value input
in the programmable mix screen. Mixing is proportional,
so small inputs of the master channel will produce small
outputs of the slave channel. Each programmable mix
has a mixing offset. The purpose of the mixing offset is to
redefine the neutral position of the slave channel.
ON:
Mixing Always On
F-NR:
Flight mode normal
F-S1: Stunt modes 1 and
F-S:
Stunt mode
HOLD: Throttle hole toward self
GEAR: Gear channel toward self
Programmable Mixing 1-3
Assigning Channels
Press the
Down
and
Select
keys simultaneously to
access the Function Mode.
In Function Mode, use the
UP
or
Down
keys to
select the desired
PROG. MIX
screen. (1-). Press
the
IncreaSe
or
DecreaSe
button to access the
Programmable Mix function.
Press the
IncreaSe
or
DecreaSe
keys to select the
desired master channel.
Press the
Select
key to highlight the slave channel.
Press the
IncreaSe
or
DecreaSe
keys to select the
desired slave channel.
[PROG.MIX1]
◊THRO≥ THRO ON
RATE: 0%
0%
SW:ON
OFFSET: 0
Press to enter
Function Mode
Press to enter PROG MIX
Press to select master channel
or slave channel
Press to highlight
master channel or
slave channel
Press to return
value to default
