JR XP7202 Скачать руководство пользователя страница 80

Страница: 80 / 104

XP70 Instruction Manual

The Exponential function allows two exponential rates to

be programmed and selected with a switch. Exponential

is available on the aileron, elevator and rudder channels.

Changing the exponential value does not affect the

maximum control authority but only affects control

sensitivity. Exponential is normally used to reduce control

sensitivity around neutral while still allowing high control

authority at the extremes of throw. The sensitivity around

center can be tailored using the Exponential function to

precisely adjust control feel.

Exponential rates can be controlled by their respective rate

switches (aileron, elevator and rudder), or combined on a

single switch, see D/R Switch Select Page .

Exponential is available for the aileron, elevator and rudder

channels. Expo values are adjustable from –100% - LIN

- +100%. The factory default settings for both the 0 and 1

switch positions are LIN or 0%. Either switch position may

be selected to give any desirable EXPO rate by placing

the switch in the desired position and adjusting the value

accordingly.

NOTE

: A negative (-) Expo value will increase sensitivity

around neutral, and a positive (+) Expo value will decrease

sensitivity around neutral.

Dual Rate & Exponential (continued)

To Adjust the Exponential

Press the

Down

and

Select

keys simultaneously to

access the Function Mode

In Function Mode, use the

Down

keys to select

the

DUAL RATE

and

EXPONENTIAL

screen.

Press the

IncreaSe

DecreaSe

key to select the

desired channel (

AILE

ELEV

RUDD

)

Move the selected channel’s dual rate switch to the desired

position, 0 or 1.

Press the

Select

key until

EXP

is highlighted

Adjust the Expo rate values for the selected switch position

using the

IncreaSe

DecreaSe

keys.

[EXPONENTIAL]

RUDD

POS-0

EXP LIN

≥OUTPUT

Press to enter

Function Mode

Press to enter EXPONENTIAL

Press to adjust value

Press to select

desired channel

Press to return value to

default setting

Содержание XP7202









































































































Результаты поиска

Содержание XP7202

Отзывы:

Бренды по названию

Популярные бренды

JR XP7202, Инструкция по эксплуатации

Результаты поиска

Содержание XP7202

Отзывы:

Бренды по названию

Популярные бренды