7
XP70 Instruction Manual
The Synthesized Channel function allows all legal 7MHz
channels, (channel 1 through 60) to be selected). The
selected channel will not transmit until it is accepted on
the warning screen each time the transmitter is turned on.
Also note that the receiver must be on the same channel.
TRANSMITTER:
Press and hold the
Down
and
Select
keys
simultaneously while turning on the transmitter to enter
System Setup mode.
Press the
UP
or
Down
key until
SYNTHESIzED CH
appears on screen.
Press the
IncreaSe
or
DecreaSe
key to select the
desired channel/ frequency.
Synthesized Channel
To Select a Channel
Press the
Down
and
Select
keys simultaneously to
return to the WARNING screen.
To transmit on the selected channel displayed in the
warning screen press the
clear
key. The screen will
change to the main screen and the transmitter will emit a
signal on the selected channel.
NOTE
: When turning on the transmitter, the
warning screen is displayed with the previously
selected channel. No signal is being transmitted.
To accept this displayed channel, press the
clear
key. A signal will then be transmitted on
the selected channel.
[SYNTHESIZED CH]
FREQ. 72.09MHz
CH 15
Press to enter main screen
Press to enter SYNTHESIZED CH
Press to accept channel
and begin transmitting
