JR XP7202 Скачать руководство пользователя страница 72

Страница: 72 / 104

XP70 Instruction Manual

The XP70 has a unique throttle trim recovery feature.

Throttle Recovery stores the last know throttle trim position

before the trim is moved to the full down (closed) position.

That stored position is then recalled by moving the throttle

To Activate the Throttle Recovery Function

Throttle Recovery

Press the

Down

and

Select

keys simultaneously then

turn on the transmitter.

Press the

key until

THRO RECOVERY

appears

on screen.

Press the

IncreaSe

DecreaSe

key to turn on/off

the Throttle Recovery function.

[THRO RECOVERY]

INH

Press to enter main screen

Press to enter THROTTLE RECOVERY

Press to turn on/off function

trim up (open) one notch. This makes shutting off the

engine and restarting it with the correct trim position easy.

Throttle Recovery must be activated for each model.

Содержание XP7202









































































































Результаты поиска

Содержание XP7202

Отзывы:

Бренды по названию

Популярные бренды

JR XP7202, Инструкция по эксплуатации

Результаты поиска

Содержание XP7202

Отзывы:

Бренды по названию

Популярные бренды