JR Voyager E, Руководство по сборке

Страница: 17 / 72

3-5
....... 4 pcs
2.6 x 32 mm Phillips Head Bolt
.................................................. 4 pcs
2.6 mm Lock Nut
2.6 mm Lock Nuts (4)
2.6 x 32 mm Phillips Head Bolt (4)
2.6 x 32 mm Phillips Head Bolt (4)
Tighten bolts after the belt tension has been set. Check to insure that the tail
rotor output shaft is level before tightning.
Tail Belt Twist/Direction
17
Tail Boom Assembly Installation
Slide the tail boom through the tail boom carrier and engage the tail drive
belt over the front pulley. Next, set the belt tension as shown below.
Twist the tail belt to the
direction shown below and
engage it over the pulley.
It is important to install the belt
in the proper position to insure
the correct rotation of the tail
rotor blades during flight.
Belt tension should be set
so when pressing with
your finger, both sides of
the belt do not come in
contact with each other.