JR Voyager E, Руководство по сборке

Страница: 16 / 72

3-3
3-4
.......................... 2 pcs
2 x 4 mm Set Screw
................ 2 pcs
2 x 10 mm Socket Head Bolt
Use Threadlock
3 x 4 mm Set Screw (2)
2 x 10 mm Socket Head Bolt (2)
Use Threadlock on both bolts.
Tail Blade Holder
Tail Rotor Hub
................ 1 pc
2 x 8 mm Self Tapping Screw
...................... 1 pc
Tail Lever Spacer
.................... 1 pc
2 x 7 mm Flat Set Screw
........................ 1 pc
Steel Joint Ball
.................. 2 pcs
2 x 6 mm Socket Head Bolt
................................. 1 pc
Tail Case Spacer
Tail Case Spacer
2 x 6 mm Socket Head Bolt (2)
Tail Control Lever
Tail Lever Spacer
2 x 8 mm Self Tapping Screw
2 x 7 mm Flat Head Screw
Steel Joint Ball
Tail Pitch Ball
Tail Pitch
Ball Joint
16
Tail Rotor Assembly Installation
Tail Pitch Control Lever Installation
Make sure that the 3 x 3 mm
set screws engage into the
two flat spots on the tail
output shaft.
Note: Be sure to
engage the tail
pitch slider joint
ball into tail pitch
lever joint.