JR Robinson R22, Руководство по сборке

Страница: 25 / 76

25
5-3
TAIL CENTER HUB ASSEMBLY
5-4
TAIL BLADE HOLDER ASSEMBLY
2 x 8 mm Socket Head Bolt
................ 4 pcs
3 x 15 mm Socket Head Bolt
........ 2 pcs
3 mm Lock Nut
.............................. 2 pcs
2 mm Hex Nut
.............................. 4 pcs
* Be sure to note direction of the tail rotor blades during assembly.
Tail Blade Holder w/Ball
(outside)
3 x 15 mm Socket
Head Bolt
2 x 8 mm
Socket Head Bolt
Tail Blade Holder
w/o Ball (inside)
2 mm Hex Nut
3 mm Lock Nut
Tail Rotor Blade
Rotation
Two Sets Required
Tail Rotor Center Hub
Tail Blade Holder Bearing (4)
Tail Slide Ring Assembly
Use red Threadlock
Use
Threadlock
Be sure to engage the two 3 mm set screws
into the hole in the tail output shaft.
3 mm set screw
Use red Threadlock
3 x 3 mm Set Screw
............................ 2 pcs
3 mm Lock Nut
............................. 2 pcs
3 x 10 x 4 mm Tail Blade Holder Bearing
................. 4 pcs
3 mm Lock
Nut (2)
Use blue Threadlock
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 25