JR Robinson R22, Руководство по сборке

Страница: 15 / 76

15
3-1
MAIN DRIVE GEAR/AUTOROTATION ASSEMBLY
3-2
MAIN DRIVE GEAR/AUTOROTATION ASSEMBLY INSTALLATION
2. Secure the autorotation hub to the
main rotor shaft using the 3 x 22 mm
socket head bolt. Next, slide the main
shaft collar onto the main rotor shaft.
While pulling upward on the main
rotor shaft, secure the main shaft
collar to the main rotor shaft using
the four 4 x 4 mm set screws.
1. Once the main shaft assembly is
in place, adjust the gear mesh of
the clutch bell and tail belt pinion
gears and secure the bolts left
loose from Step 2-1.
3 x 6 mm Socket Head Bolt (4 pcs)
[Tighten equally to prevent warping of main drive gear.]
Main Drive Gear
Use Threadlock
Autorotation Assembly
Main Shaft Collar
4 x 4 mm Set Screw
3 x 22 mm Socket Head Bolt
3 mm Lock Nut
8 mm
3 mm
Main rotor
shaft
Use Threadlock
3 mm Lock Nut
Autorotation
Assembly from
Step 3-1
3 x 22 mm Socket
Head Bolt
Use blue Threadlock
.................................. 4 pcs
..... 1 pc
.................................. 1 pc
4 x 4 mm
Set Screws (4)
3 x 6 mm Socket Head Bolt
...... 4 pcs
Use blue Threadlock
= Oil
= Grease
Autorotation Hub
Internal View
JRP9012.46 Robinson R22 Manual 10/6/00 5:05 PM Page 15