JR Security Systems centrum KD2, Руководство пользователя

Страница: 9 / 16

Centrum KD2 - 9 - Centrum KD2 VR
ICON KEYPAD FUNCTIONING
LCD DISPLAY OVERVIEW
ICONS FUNCTIONS:
Failure / tamper zone:
OFF No failure/tamper in zones
ON Failure / tamper in zone
Blinking -
Alarm:
OFF No alarm
ON Alarm in memory
Blinking Alarm ringing
Phone line failure:
OFF Phone line OK
ON Phone line is in failure since
more than 1 minute
Blinking
Phone line is in failure since less
than 1 minute
Omitted zones:
OFF No bypassed zones
ON There is a bypassed zone
Blinking -
Clock state:
OFF -
ON Clock is programmed
Blinking Deprogrammed clock
Alarm state:
OFF System disarmed
ON System armed
Blinking Entry/exit path
AC state:
OFF Correct main power(220VAC)
ON Fail in main power(220VAC)
Blinking -
Battery state:
OFF Battery OK
ON Low battery
Blinking -
KEYPAD DISPLAY
Appears when entering a wrong code or some
erroneous function
The display will also show the functions done, as well as
several indications when entering the codes or
programming.
KEYPAD BUZZER
The keypad has a buzzer that advice acoustically the control
panel state when arming or carrying out some function.
There are the following buzzer sounds: Entry path / Exit path /
Day zone / (chime) detection / Intrusion alarm / Fire pre-
alarm / Fire alarm / Keypad tactile sound / Wrong code
/
Ring / Disarming.
There are some sounds that can be deleted by
programming (entry/exit path) and more, through direct
functions from the keypad (chime and day zone, low bat of
wireless detector).
PANEL IN STAND-BY
With PANEL disarmed, the Display shows the state of the
areas as:
| |
On
Off
Disarmed Area
Armed Area
Area 1 Î ⎢ ⎢ Í Area 2
Zones Detection
With the PANEL disarmed, if there is some zone detection, the
LCD will show the detected zones. The corresponding
numeric LCD segment will light and will keep lit until restoring
the zone (stop detecting).
ARMING / DISARMING
In order to arm/disarm de control panel, introduce a valid
user code and then press E :
User code + E = Changes panel
state
In case of having more than one area on the system, and in
order to assure the arming / disarming of the user areas, use
the absolute arming / disaming function just like:
User Code + F1 + E Always arms
User Code + F2 +
E
Always
disarms
Afted done, the display will show:
User arming
User disarming
And next, the user number that has done the function.
Nº
User Number
−
If after disarming the system, any zone had caused
alarm during the last arming period, the keypad will
show these zones using Zone leds while the display will
indicate:
−
Also if there are zones in failure, these will be indicated
after disarming while the displays shows:
− Also if there are outputs in failure, these will be indicated
after disarming with numbers, while the keypad
shows:
When trying arming/disarming, if don’t allow, the display will
show the cause:
!
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
!