JR Security Systems centrum KD2, Руководство пользователя

Страница: 15 / 16

Centrum KD2 - 15 - Centrum KD2 VR
F2 + 5 Access Control
. Enables / Disables
the keypad relay, this relay activates
during 2 seconds when arming /
disarming a code.
2 + 3 Ring Sound:
Activates / Deactivates
the Ring sound of the keypad.
5 + 6 Disarming melody:
Activates /
deactivates the disarming melody of
the leypad.
USER FUNCTIONS
The functions keys shall always be pressed during
2 sec
.
Quick arming
Press the keys at the same time and during 2 sec. The
control panel will arm without code.
* + E
The display shows de [ARMING] message
Bypassing / Restoring the Zones
Introduce a valid user code and then press the F1 key,
followed by the zone number to bypass. The zone number
is only one digit long.
User Code + F1
2S
+ # zone. +
# zone
+ E
During the function the Display shows
Zone Bypass: -
[Zone Alias]
Once done, the keypad will show the result of the action,
as Bypassed zones does.
Bypassed Zones
[Zone Alias]
Night Bypass
Enter first a valid user [Code] , then, the function key and
validate.
User
Code
+ F1
2S
+ E
Once done, the keypad will show the bypassed zones.
Also the areas of the User code will be armed
Day zones arming/disarming
Enter the master user code and then press the key
function, the keypad will display during 15 sec. the current
state of the Day Zones:
Master
Code.
+ F2
2S
+ E
Day Zones
Activated
Day Zones
Deactivated
To modify or remain the state, press the suitable key:
F2
2S
+ E
Changes the State
+ F1
Remain in same state
Enabling disarming of the Maid code
Press the [ code] and press the function key :
User Code + F3
2S
The control panel will arm and will allow an unique maid
code disarming.
Maid Code
Activated
Remote Download Enabling
Enter Master code, and then the F4 key.
Master Code + F4
2S
This will enable the remote download function during 4
minutes.
USER PROGRAMMING
Enter in programming:
In order to enter in user programming, press the
[*]
key
during 2 seconds and then the master Code:
* + User code (Master) + E
2
sec
Master code from factory is: ................................
[1111]
When entering programming, the keypad will show:
Address: - - -
i: - - - - - -
Exit programming:
To exit programming press sequentially:
* + E
The panel will exit automatically if no key is pressed during
4 minute.
Program the data in the addresses:
Follow these steps:
1.
Select the address to program
2. Enter the data
3. Validate with key “E”.
when introducing the third digit of address, data on this
address will automatically be shown, if the data is larger
than display ( case of phone numbers) press [E]
immediately after third digit of address and data will be
displayed sequentially.
Example: Address 001 (Code 1), 4 digits
Address: 0 0 1
i: 1 2 3 4
After data has been shown, you can:
− Maintain data in address without change, simply exit
the address by pressing
[F1]
− Modify the data: begin to enter the new data that will
be shown in bottom of screen, once data has been
entered, press
[E].