JR Security Systems centrum KD2, Руководство пользователя

Страница: 7 / 16

Centrum KD2 - 7 - Centrum KD2 VR
When pressing a key during 2 sec ., the corresponding
function will activate, showed through the keypad and led:
1
Zones in Detection
, the keypad leds show
the zones that are detecting in that moment. The
Displays shows a ‘d’. If `*’ is pressed before the
‘1’, the display will show ‘F’ and the leds the zones
that are in failure.
2
Bypassed Zones
, the keypad leds show the
zones that are bypassed. The Displays shows a ‘o’
3 Event Log
, The keypad shows the last 125
events occurred in the panel, beginning from the
last one.
If no code is entered before the ‘3’ the display
will show ‘
a
’ and the last zones that have caused
alarm.
The displays shows sequentially the zone number/
user, hour, minute day and month of the event
And the state leds, the type of event as:
: User Arming
: User Disarming
: Alarm in Zone
Use the keys to change the current event
[F1]: Show the most recent events
[F2]: Show the past events
[
∗
]: Exists from Event log function.
If the displays shows [ - ] , it means that there are
no more events to show
Ex: Alarm in zone 8, 25 of August At 12:45.
0 - 8 – 1 – 2 – 4 – 5 – 2 – 5 – 0 – 8.
4
Output Test
activates the KD2VOX outputs
during 2 seconds.
If `*’ is pressed before the ‘4’, the display will
show ‘0’ and the leds the outputs that are in
failure
5
Chime Zone
, activates / deactivates the
function Chime (Buzzer) of the input/output and
day zones
7
Alarm memory reset
. Turns off the “alarm
memory led”. Doesn’t delete the events.
8 Tactile Sound
, activates / deactivates the
keypad tactile sound (sound pulsation keys).
9 Reset
, disables:
The buzzer when detects a day zone.
The keypad buzzer if it is sounding.
The walking route concludes.
The fire pre-alarm.
Wireless zone low battery sound.
F1 + 1 Police,
sends the police report to
the central receiver
F2 + 4
Fire
, sends the firemen report to the
central receiver
F3 + 7
Ambulance
, sends the medical
assistance report to the central
receiver
F1 + 2
Walking path
. Checks the control
panel detection function during 4
min. The zones leds shows the
detected zones.
USER FUNCTIONS
The functions keys shall always be pressed during 2 sec .
Quick arming
Press the keys at the same time and during 2 sec. The
control panel will arm without code.
* + E
Bypassing / Restoring of Zones
Introduce a valid user code and then press the F1 key,
followed by the zone number to bypass.
User Code + F1
2S
+ # zone. +
# zone
+ E
Once done, the keypad will show the bypassed zones.
It is always necessary to introduce a valid user code,
because only the zones that belong to the areas of the
entered code can be bypassed.
Night Bypass
Enter the [Code] , then, the function key and validate.
User Code + F1
2S
+ E
Once done, the keypad will show the bypassed zones.
Also the areas of the User code will be armed
Day zones arming/disarming
Master Code. + F2
2S
+ E
Enter the master code and then press the key function; the
keypad will display during 15 sec. the current state of the
Day Zones:
O = ARMED / F = DISARMED
To modify or maintain the state, press the following key:
F2
2S
+ E Changes the State
+ F1 Remain in same state
Enabling the Maid code
Enter a valid user code and then press the function key:
User Code + F3
2S
The control panel will arm and will allow a single maid
code disarming.
Remote Download Enabling
Enter Master code, and then the F4 key.
Master Code + F4
2S
This will enable the remote download function during 4
minutes.
USER PROGRAMMING
Enter in User programming.
In order to enter in user programming, press the
[*]
key
during 2 seconds and then enter the master Code
* + Master Code + E
2
sec
Master code from factory is:
[1111]
After that, the display will show