JR ProPo C.O.L.T., Руководство по эксплуатации

Страница: 49 / 82

48
ᴾ
▋ Model Copy & Erase【MODEL COPY/ERASE】
▋ Function Explanation
From this screen, copying and erasing of model data is carried out. This can be carried out on
both the transmitter memory and on the micro SD Card. In addition, it is possible to copy model
data between other matching JR transmitters that have been connected using a trainer cable.
▋ Setting Method
For safety reasons, a screen initially appears
confirming that you wish to stop radio wave
transmission. Select “YES” to continue to the
function screen. No RF output is transmitted.
Model Copy
Model copy can be selected from INTERNAL, MICRO SD-CARD or TRANSFER.
Copy Source
The Copy Source can be selected as the Internal Memory “INTERNAL”, MICRO SD CARD “SD-CARD”, and
between two transmitters “TRANSFER”.
If “Transfer” is selected, the Copy source will be the current model number.
Be sure to select the particular Model before proceeding.
Copy Destination
The Copy Destination can be selected from “INTERNAL”, “SD CARD”, or “TRANSFER”.
If wish to select the Destination as “INTERNAL” or “TRANSFER”, chose the appropriate Model number.
If data exists on the Copy destination, it cannot be written over. Be sure to erase the data first before copying.
When the SD CARD is chosen, be sure to Input the File name.
Helicopter
Airplane
Glider
System List
Confirmation of Radio RF output
Model copy can be selected by
INTERNAL, SD-CARD or TRANSFER.
※ When the SD CARD is chosen, be sure to Input the File name first.
Copy Destination
Model selection display Model selection display
Select application
Execute copying
Model copy can be selected by
INTERNAL, SD-CARD or TRANSFER.
Copy Source
If the File name chosen is exactly the same as a previous entry, this cannot be copied over. Modify the file
name and try again.