JR ProPo C.O.L.T., Руководство по эксплуатации

Страница: 2 / 82

1
Introduction
ᴾ
▋ Greetings
Thank you for choosing to purchase this JR product.
This is a highly developed product with outstanding
functionality and ergonomics that concentrates the
essence of the technology built up by this company
through many decades of experience. In order to make
full use of the features of this radio and to safely enjoy
your RC activities, please carefully read this operation
manual.
Our whole company hopes that you will enjoy using
this product for many years.
ᴾ
▋ Features
JRʼs newly developed DMSS system maintains high
speed servo response while allowing simultaneous
use of telemetry functions.
T h e h i g h - s p e e d t e l e m e t r y f u n c t i o n a l l o w s
information from the aircraft (that was previously
unknown to the user) to be monitored on the
transmitter. In addition, alarms with unique sounds
alert the user to the situation on the aircraft without
even looking at the screen.
The telemetry sensor connection employs a bus
system that does not require a relay box, allowing
sensor extensions and additions to be easily carried
out. It is acceptable to merely connect the necessary
sensors in parallel.
With our automatic safety system, the receiver
will not operate if the correct model has not been
selected in the transmitter before flight.
The transmitter features a large LCD display and
input keys that are intuitive and easy to use.
A Trim Input function can allocate trim levers to
change numerical values of various functions (such
as program mix values) during flight.
A new function synchronizes the operation of servos
on multiple flight control surfaces in real time. This
completely eliminates the time lag with fast control
inputs.
A micro SD card slot enables saving aircraft model
data and updating of transmitter software to be
easily carried out, without connecting the transmitter
to a PC.
The 20-aircraft model memory can be utilized for
storing helicopter, airplane, and glider models.
A Trainer function is incorporated, which also allows
training to be carried out individually for each
channel.
The throttle curves, pitch curves, and curve mixing
use a multiple point adjusting method, and you can
also activate an optional exponential curve function
that further smoothes the curves.
Three systems of multi-function program mixing are
available.
A Touch Select function is incorporated, which
enables automatic switch selection for programmed
functions. This selection is easily carried out.
A ʻMy Listʼ screen is provided that enables display
and simple calling up of frequently used functions
that the user has selected.
▋ Transmitter specifications
Item Specification
Part Number: NET-M116G
Type of control: 6 channel computer mixing
RF: 2.4GHz
Modulation: DMSS (Dual Modulation Spread Spectrum System)
Power source:
6.4V Lithium Ferrite battery 2F1400(1400mA)
*Optional 7.2V Li-ion battery available (2L3200)
Neutral position: 1.5ms
NEM-B82A
▋ AC adaptor specifications
Item specification
Part number:
This is our first nostalgic transmitter - project C.O.L.T. - Classic
Old Looking Transmitter. While the transmitter is retro on the
outside, with a 1960's feel, on the inside it features the latest
in JR DMSS 2.4GHz technology.
Compatible with XBus system. XBus compatible devices
can be adjusted through the transmitter.
Input Voltage: AC100V-240V 50/60Hz
DC15V 30W Output Voltage:
#04029 NEC-A1530
A new generation long-life Li-Fe battery is used which
contributes to a large reduction in transmitter weight. The
charging control circuit is built into the transmitter.
This is a multi-function 6-channel transmitter that is
capable of supporting many aircraft. It has functionality
normally only seen in more expensive transmitters.
When using the dial to change numerical values,
simultaneously pressing the dial and rotating it allows
the value to be changed at a ten-times faster speed.