JPA DiaDENS-T, Руководство по эксплуатации

Страница: 18 / 92

81
MED
→
20 Hz
→
60 Hz
→
77 Hz
→
140 Hz
→
200 Hz. When the unit is switched on, the
default mode setting is 77 Hz.
4.4. Stimulation power setting
In order to set the desired power, use the
Power
and
Power
buttons:
— each time the button is pressed, the power is decreased or increased by one unit;
— for continuous increase or decrease of the stimulation power press and hold down
the button. When the desired power level is reached, release the button.
The stimulation power level setting is shown in the left top corner of the display as
a number symbol and on the linear horizontal scale. If the detachable electrode is
connected, the power is reset to 0.
4.5. Timer
If you need to set a fixed stimulation time, use the Timer function intended for operation
in the 200 Hz, 140 Hz, 77 Hz, 60 Hz and 20 Hz modes and is activated by pressing the
button.