Troubleshooting
Problem
Solution
The ambient temperature
is not within the range
between 5
℃
and 40
℃
(41
℉
~
104
℉
).
Place the
in a room for at least 30
minutes at room
temperature between
5
℃
and 40
℃
(41
℉
~
104
℉
)
thermometer
The thermometer is not
functioning properly.
Unload the battery,
wait for 1 minute and
repower it. If the
message reappears,
contact the retailer
for service.
Error message
20
19
21
22
Specifications
Forehead mode: 34.0
℃
~43.0
℃
(93.2
℉
~109.4
℉
)
Object mode: 0
℃
~100
℃
(32
℉
~212
℉
)
Forehead mode:
±
0.2
℃
(0.4
℉
) during 35.5
℃
~42.0
℃
(95.9
℉
~107.6
℉
)
at 15
℃
~35
℃
(59.0
℉
~95.0
℉
) operating temperature range
±
0.3
℃
(0.5
℉
) for other measuring and operating
temperature range
Object mode:
±
4% or
±
2
℃
(4
℉
) whichever is greater
Approx.
grams(with batteries)
118
DC3V(2
×
AA
battery)
Measuring range
Laboratory accuracy
Display resolution
0.1
℃
or 0.1
℉
Measure time
Operating temperature
range:
Storage and transport
temperature range
-25
℃
~ 55
℃
(-13
℉
~131
℉
), 15%~95%RH, non-condensing
70kPa ~ 106kPa
Atmospheric Pressure :
Clinical accuracy
Dimension
Weight
Battery
Battery life
Approx. 3000 readings
Measuring site
Forehead(Forehead Mode)
Oral (This thermometer converts the forehead temperature
to display its “oral equivalent.”)
Reference body site
Operation mode Forehead mode(Adjust mode)
Ingress protecting rating
IP22
Shock
withstands drop of 3 feet
Expected service life
Three years
5
℃
~40
℃
(41
℉
~104
℉
), 15%~85%RH, non-condensing
70kPa ~ 106kPa
Atmospheric Pressure :
Battery Replacement
Contraindication
No contraindication
Troubleshooting
Care And Cleaning
1. The probe window must be kept clean, dry, and undamaged at all
times to ensure accurate readings. The accuracy of temperature
readings can be affected by damage to the probe window, or the
presence of dirt, fingerprints, dust and other soiling
compounds on the probe window. Degraded sensors can degrade
performance or cause other problems.
2
.
For cleaning
：
1) Soak a clean soft cloth in drinking water,wring it out,and then
wipe the thermometer(including probe) no less than 3 times
；
2) Visual or use magnifying glass to observe the thermometer have
no visible dirt and stains ,then use another clean soft cloth to
wipe the thermometer residue water
；
3) Put the thermometer in the original packaging.
3.For disinfection
：
1) Soak a clean soft cloth in drinking water,wring it out,and then
wipe the thermometer(including probe) no less than 3 times
；
2) Visual or use magnifying glass to observe the thermometer have
no visible dirt and stains ,then use another clean soft cloth to
wipe the thermometer residue water
；
3) Using a clean soft cloth dipped in 70% medical alcohol,wipe the
probe for 3 Times,each time 1 minute.
4) Using a clean cotton swab dipped in 70% medical alcohol,wipe
the sensor window 3 times
；
5) Wait at least 10 minutes to let the alcohol volatilization and put it
in the original packaging.
4. Do not put the thermometer into water directly.
5. Store the thermometer in a dry location, free from dust and
contamination and away from direct sunlight.
6.
Put the thermometer back to the original packaging after using.
1.
right corner of LCD display as
shown
in
Figure 8.
When flashes, it indicates that the power is low, but you can
continue to measure; replace battery when " "
in the
remains
displayed
lower
2. Slide battery cover down as shown in Figure 9.
3. Remove battery and install 2 new
alkaline batteries
AA
as shown
.
in Figure 10
4. Slide battery cover back on.
Figure 8
Figure 9
Figure 10
Approximately 1 second
140.0*37.8*34.8mm
0-1 year:
Clinical bias: -0.17
℃( -
0.31
℉) ;
Clinical repeatability:
0.06
℃(
0.11
℉) ;
Limits of agreement: 0.24
℃(
0.43
℉)
1
-
5
years:
Clinical bias: -0.17
℃( -
0.31
℉) ;
Clinical repeatability:
0.07
℃(
0.13
℉) ;
Limits of agreement: 0.22
℃(
0.40
℉)
over
5
years
:
Clinical bias: -0.17
℃( -
0.31
℉) ;
Clinical repeatability:
0.20
℃(
0.36
℉) ;
Limits of agreement: 0.26
℃(
0.47
℉)
6
Beep Alarm
If
thermometer
detects
a
body
temperature
≥
37
.
8
℃
(
100
.
0
℉
)
under
forehead
mode
,
there
will
be
a
long
beep
sound
followed
by
three
short
beep
sound
to
warn
the
user
.
语音款没有
beep,
台湾定制蜂鸣和振动共存，在蜂鸣关了之后振动打开，常规款有语音的不能有这个发烧报警
