7
14
13
12
11
Illustration For Use
Illustration For Use
1. Press the
BUTTON
, The display is activated to show all
segments.
Aim the thermometer at the center of the forehead with the
distance less than cm(See figure 3) and then press the
Button
.
Note1: Do not remove the thermometer from the forehead before
hearing
.
3.
finishing measurement.
4. Press the
BUTTON
to turn off.
After self-checking Figure 2 appears on the display
screen with voice, so you can start a new measurement.
2.
voice
Note2:If the object to be tested is too far from the probe, a
prompt will appear(See figure 4).
3
Test
If the thermometer remains in
this state for more than 10 seconds, it will automatically return
to Figure 2 state.
When the voice is off, the vibration is
automatically turned on, and there is a vibration reminder at the
end of the measurement.
The thermometer will broadcast and display the result after
To measure forehead temperature:
Temperature Taking Hints
5. Holding a hand on the forehead for any length of time will affect
the temperature reading.
6. Do not take temperature over scar tissue, open sores or abrasions.
7. Do not use the thermometer on a perspiring or sweating forehead,
as this may affect the reading.
8. Don't take a measurement while or immediately after nursing a
baby.
9. Do not take temperatures with this thermometer near places that
are very hot, such as fireplaces and stoves.
10. The probe window of the thermometer is the most delicate part
of the device. Do not touch the probe window. The accuracy of
the reading may be affected if the probe window is damaged or
dirty.
11. If the thermometer is stored in a significantly different
environment than testing location, place it in the testing location
for approximately 30 minutes prior to use.
12. It is not intended for use in the oxygen rich environment and
presence of flammable anesthetic mixture with air, oxygen or
nitrous oxide.
To measure object temperature:
1.
you can take
the object temperature after hearing
.(see figure 4)
2. Aim the thermometer at the center of the object you want to
measure with The distance less than 3cm.
3. Press the
Test Button
and then read the temperature on the
display.
4. Press the
BUTTON
to turn off..
Press the
Button
to turn on the thermometer,
press and hold
Setting Button
toswitch to object mode,
voice
How to change the forehead mode and object mode:
You can press and hold
to switch the mode between
Forehead mode and Object mode.
Setting Button
How to turn on or off sound:
You can press
to turn on or off sound.
Setting Button
To ensure that the reading always reflects the body temperature
accurately, you need to take account of the following factors which
may affect an accurate reading.
1. It is important to know each individual's normal temperature
when they are well. This is the only way to accurately diagnose
a fever. To determine normal temperature, take multiple readings
when healthy. Re-measure with a standard digital thermometer
for confirmation.
2. Users
3.
. Oils or cosmetics on the forehead may give a lower temperature
reading than the actual one.
must be inside for 30 minutes before taking a measurement.
Note: Users and the thermometer should be in the same ambient
temperature for at least 10 minutes before taking a reading.
Users should not drink, eat, or be physically active such as
bathing, showering, shampooing and hair drying before/while
taking the measurement. Remove hat and hair and wait 10 minutes
before taking a reading.
4
Remove dirt from the forehead before
taking a measurement. Wait at least 10 minutes after washing the
forehead area before taking a reading.
Temperature Taking Hints
Figure 3
Figure 2
Figure 4
Figure 5
6
Beep Alarm
If
thermometer
detects
a
body
temperature
≥
37
.
8
℃
(
100
.
0
℉
)
under
forehead
mode
,
there
will
be
a
long
beep
sound
followed
by
three
short
beep
sound
to
warn
the
user
.
语音款没有
beep,
台湾定制蜂鸣和振动共存，在蜂鸣关了之后振动打开，常规款有语音的不能有这个发烧报警
