Joycare JC-509, Инструкция по эксплуатации

Страница: 6 / 24

6 7
heating, switch off the product when you do not use it.
Never place the product under blankets or pillows.
The product is for an indoor use only.
Use this product only for its intended purpose, as described in this
instruction manual. Any other purpose can be dangerous.
INSTRUCTIONS
Switching on and off the appliance.
Use the button both to switch on and off the product.
Accessory: Nose trimmer
To cut ear and nose hair.
Remove the blade cover. Switch on the product and start gently to remove the hair in your ears
and nose.
Warning: before drawing up the product to your face, always switch it on.
Accessory: sideburns trimmer
To cut your sideburns. If necessary, you can add the cutting guide. Switch on the product and start
gently removing your sideburns.
IMPORTANT: before attaching or removing accessories, you should switch the product off.
In order to remove accessories, turn the head counter clockwise and take it out. Then insert the
new accessory and turn it clockwise.
BATTERY
In order to insert batteries (1x1.5V AA), just turn the product base counter clockwise. Then insert
batteries respecting the polarity. Close the compartment, turning the product clockwise. Replace
with new batteries when the batteries are low. The supplied batteries are for trial use only and
they may have a shorter life.
MAINTENANCE AND CARE OF THE PRODUCT
Before cleaning the product, switch it off. Remove the cutting head and clean it from hair by the
special brush. Then wash the head with water. Dry the head carefully and then pour one or two
drops of oil on blades. Never dip the product in water.
When the product is not used for a long period, it is recommended to remove batteries in order to
avoid leakage that can damage the proper product functioning.
Always store the product away from heating sources, sunlight, dampness and sharp objects.
Clean the unit with a damp cloth and never use detergents or abrasive liquids.
WARNING:
never allow water to come into the product. When you clean the head, please point
the blade downwards. Only after the unit has dried completely, should the trimmer switch on again.