16
17
c. After selecting the memory user, the monitor starts to seek zero pressure. See Fig. 6-3.
d. The monitor inflates the cuff until sufficient pressure has built up for a measurement. Then the monitor
slowly releases air from the cuff and carries out the measurement. Finally the blood pressure and pulse
rate will be calculated and displayed on the LCD screen separately. Irregular heartbeat symbol (if any)
will blink. See Fig. 6-4 & 6-5. The result will be automatically stored in the current memory bank.
6.3
6.4
6.5
e. After measurement, the monitor will turn off automatically after 1 minute of no operation. You can
also press the “START” button to turn off the monitor manually.
f. During measurement, you can press the “START” button to turn off the monitor manually.
Note: Please consult a health care professional for interpretation of pressure measurements.
7. DISPLAYING STORED RESULTS
This device is capable of memorizing data for two users: up to 60 readings for each user. U1 (user 1) - U2
(user 2) After each reading, the JOYCARE blood pressure monitor stores in memory all data from user 1
or 2 depending on the initial setting.
a. After the measuring, you can review the measurements in the current memory bank by pressing the
button “MEM”. Now the LCD displays the amount of the results in the current bank. See Fig. 7.
7
7.1
7.2
b. You can also press the “MEM” button in Clock Mode to display the stored results. The current memory
bank will flash and the amount of results in this bank will be displayed. See Fig. 7-1. Press the “START”
button to change to the other bank. See Fig. 7-2. Confirm your selection by pressing the “MEM” button.
The current bank will also be confirmed automatically after 5 seconds with no operation.
c. After selecting the memory bank, the LCD will display the average value of the last three results in
this bank. See Fig. 7-3 & 7-4. If no results are stored, the LCD will show dashes as shown in Fig. 7-5.
7.3
7.4
7.5
d. When the average is displayed and you press the “MEM” button, the most recent result will be
displayed. See Fig. 7-6. Then the blood pressure and the pulse rate will be shown individually. Possibly
the irregular heartbeat symbol may flash. See Fig. 7-7 & 7-8. Press the “MEM” button again to display
the next result. See Fig. 7-9. In this way, repeatedly pressing the “MEM” button displays the respective
results measured previously.
7.6
7.7
7.8
7.9
Содержание JC-1321
