FCP / AFC trigger:
As the other triggers, it is possible to change between FCP
and AFC with the buttons “+“ and “-“.
AUTO trigger:
In the AUTO mode the support of quick charger protocoll of
the charging unit is tested. Press “OK“ in the AUTO mode to
determine the automatic charging detection. Wait about 25
seconds, after that the LED should show the supported quick
charger protocoll of the charging unit.
7. OTHER INFORMATION
Our infomation and take-back obligations according to the electrical and electronic
equipment act (ElektroG)
Symbol oN electrical and electronic devices:
This crossed out bin means that electrical and electronic devices do not
belong into the household waste. You must hand over your old appliance to
a registration office.
Before you hand over the old appliance, you must remove used batteries
and accumulator which are not enclosed of the device.
Return options:
As the end user, you can with the purchase of a new device hand over your
old appliance (which has essentially the same functions as the new one)
free of charge for disposal.
-Possibility of restitution at our company location during our opening
hours:
Simac GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
-Possibility of restitution nearby :
We send you a parcel stamp with which you can send us your device free of
charge. For this, you must contact us per email at [email protected] or per
telephone.
Information about package:
Please package your old appliance safe during transport. Should you not
have a suitable packaging material or you do not want to use your own, you
can contact us and we send you an appropiate package.
2
1
