4. FUNCTIONS
1. Functions for protection:
OVP (over voltage protection): over voltage protection by 25 to 30 V,
the LED display shows “OVP“ like the picture below.
OTP (over temperature protection): with a temperature of over 80 °C
the LED display shows “OTP“.
OPP (over power protection): With a power of over 35 W the
LED display shows “OPP“.
After the load is in the protection mode, you have to set the
recovery mode for the output.
Display of voltage, current and power
Intelligent fan, with a power of 10 W or a temperature of 40 °C the
fan starts automatically to cool the device
Precise multiloop potentiometer to adjust the current accurately up
to 0.01 A.
You can set the standard start status freely.
2. Trigger function:
The device can trigger QC2.0, QC3.0, Huawei FCP, Samsung AFC 9V
and other quick charger modes.
3. Detection of quick charger function :
You can use the Auto mode to identify if your quick charger has the
quick charger function.
4. Power-On automatic trigger function:
With this function you can trigger the quick charger after the start
of the device and activate the load automatically. It suits either for
batch tests by older charging units.
