Samsung AFC 9V: display shows “AFC9“ (blue LED glows)
Huawei FCP: display shows “FCP9“ (blue LED glows)
AUTO: dispaly shows “AUTO“ (all LEDs glow)
SET / - button:
press:
Initiate the voltage of the current quick charger mode to
trigger or to switch.
hold down:
Record current quick charger status and closes and opens
AUTO
OK / + button:
press:
Initiate the voltage of the current quick charger mode to
trigger or to switch.
trigger button:
press:
Shifting of the trigger mode
hold down:
Shifting to the load mode
Starting and Stopping of the trigger mode
Hold down the trigger button to switch between trigger and load
mode. If you switch from the trigger mode to the load mode, the
trigger state remains unchanged.
Changing mode
Press the trigger button to change between 4 modes (QC2.0, QC3.0,
FCP / AFC and AUTO)
QC2.0 trigger:
With the QC2.0 mode, press “OK“ after 2 seconds the red
LED lights up. With the “+“ and “-“ buttons, it is possible to
switch between 5, 9, 12 and 20 Volt.
QC3.0 trigger:
Like the QC2.0, shows the display the current voltage and
you can increase and decrease the voltage with “+“ and “-“.
